5.2
Charging
Please connect GND (
and charge the battery for at least 3 hours. We recommend
before first Use.
Configure and Test before installation.
5.3
LED Indications
Press and hold the Power On/Off button for 3
GPS LED (Blue)
On
Flashing/Blinking (every 0.1 second)
Flashing/Blinking ( 0.1 sec. on and 2.9
Flashing/Blinking (1 second on and 2 seconds off
GSM LED (Green)
On
Flashing/Blinking (every 0.1 second)
Flashing/Blinking ( 0.1 sec. on and 2.9 sec. off)
Flashing/Blinking (1 second on and 2 seconds off)
Copyright © 2012 Qube Inc. All rights reserved.
Please connect GND (-Black) and Power (+Red) wires to 12V or 24 external power
charge the battery for at least 3 hours. We recommend charging it for 8 hours
irst Use.
Configure and Test before installation.
Press and hold the Power On/Off button for 3-5 seconds to turn on/off the GPS Unit.
One button is pressed or input is active.
Flashing/Blinking (every 0.1 second)
Initializing or back-up battery is low
on and 2.9 sec. off)
Qube GPS Tracker has a GPS fix
on and 2 seconds off)
Qube GPS Tracker unit has no GPS fix
A call is coming in / a call is being made
Flashing/Blinking (every 0.1 second)
Initializing
Flashing/Blinking ( 0.1 sec. on and 2.9 sec. off)
Qube GPS Tracker is connected to the GSM network
Flashing/Blinking (1 second on and 2 seconds off)
Qube GPS Tracker Unit is not connected to the GSM
network
4 external power
charging it for 8 hours
on/off the GPS Unit.
One button is pressed or input is active.
up battery is low
Qube GPS Tracker unit has no GPS fix
A call is coming in / a call is being made
Qube GPS Tracker is connected to the GSM network
Qube GPS Tracker Unit is not connected to the GSM
Page
6
