QUATRO
Air Technologies Inc.
----------------------------------------------------------------
Engineers Of Clean Air
----------------------------------------------------------------
30 Hymus Blvd., Pte-Claire, Quebec, Canada H9R 1C9 Tel.:(514)630-4444 Fax:(514)630-4454
www.quatroair.com
THE SYSTEM IS DESIGNED TO BE CONSTANTLY POWERED (PLUGGED IN). USE THE ON/OFF ONLY SWITCH TO
TURN THE SYSTEM ON and OFF.
ALWAYS SWITCH THE POWER OFF BEFORE UNPLUGGING THE SYSTEM FROM THE MAIN POWER SOURCE OR
BEFORE CUTTING POWER TO THE RECEPTACLE. FAILURE TO DO SO MAY CAUSE DAMAGE TO THE SYSTEM
THAT IS NOT COVERED UNDER WARRANTY.
QUATRO IS NOT LIABLE FOR MISAPPLIED EQUIPMENT. ALWAYS CHECK SYSTEM VOLTAGE BEFORE
PLUGGING INTO POWER SOURCE.
WARNINGS
1) This is a class A product.
In domestic environment, this product may cause radio interference in which case the user
may be required to take adequate measures.
2) This filtration system is not intended for use with explosive, highly flammable, or toxic substances or environments.
(Example: where the lower flammability limit may be exceeded, see chemicals' specific MSDS for more information on
these limits.)
3) If you are collecting a flammable material, it is your responsibility to ensure that an ignition source is not introduced
into the collected material. This could be in the form of static discharge, flames, sparks, cigarettes, matches,
chemicals causing exothermic reactions, or any other source of ignition that could ignite the collected material.
4) If you are not sure if your product is explosive or considered highly flammable, you should have it tested before
operating your filtration or dust collection system.
5) Ensure that the system and the installation comply with all local NFPA and OSHA regulations.
6) Always unplug your system when inspecting or performing maintenance.
Any changes to the system will void all warranties. Only original Quatro-approved products should be used for repairs of any kind.
