24
Quatech QTM-8524 Manual
2.5
QTM-8524 Jumper Settings
Factory default jumper settings are indicated below.
·
Channel 3
·
Baudrate (bps) = 9600 bps
·
Slave Mode
·
RS-232 Interface
·
Frequency Channel = 2439.936 MHz
·
Full Duplex Mode
·
Synchronous Communication
Figure 2.5 on the following page diagrams the other possible jumper set-
tings. See section 4 for more information about how QTM-8524 modules
should be configured for different types of QTM-8000 wireless networks.
Note that the QTM-8524 must be disassambled before jumper settings can
be changed. See section 2.4 for disassembly instructions.