Compliances - Electromagnetic Emissions
EC - Council Directive 89/336/EEC
This equipment has been tested and found to comply with the limits of the following standards for a digital device:
EN50081-1
(EN55022, EN60555-2, EN60555-3)
EN50082-1
(IEC 801-2, IEC 801-3, IEC 801-4)
Type of Equipment:
Information Technology Equipment
Equipment Class:
Commercial, Residential, & Light Industrial
FCC - Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a Class B computing device, pursuant to FCC Rules.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation
with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The
user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer
could void the user's authority to operate this equipment.
QSP-100 Users Manual
1