manualshive.com logo in svg

Quatech QSC(LP)-100, User Manual

Share
Download
Quatech QSC(LP)-100 User Manual Download Page 6

1 General Information

The Quatech, Inc. QSC(LP)-100 provides four RS-232 asynchronous serial

communication interfaces for Low Profile IBM-compatible personal computer
systems using the PCI expansion bus.  The QSC(LP)-100 uses Quatech's new
Enhanced Serial Adapter design.  Legacy serial port data rates are limited to a
maximum of 115,200 bits per second.  Quatech Enhanced Serial Adapters can
achieve data rates as high as 921,600 bits per second.

As a PCI device, the QSC(LP)-100 requires no hardware configuration.

The card is automatically configured by the computer's BIOS or operating system.
 The four serial ports share a single interrupt line and are addressed in a
contiguous block of 32 bytes.  A special interrupt status register is provided to
help software to manage the shared interrupt.

The QSC(LP)-100's serial ports are implemented using 16550  Universal

Asynchronous Receiver/Transmitters (UARTs).  These UARTs contain hardware
buffers (FIFOs) which reduce processing overhead and allow higher data rates to
be achieved. 

The QSC(LP)-100 is supported under several popular operating systems

and environments.  Contact the sales department for details on current software
offerings.  Most device drivers are available for download from the Quatech world
wide web site at http://www.quatech.com.

QSC(LP)-100 User's Manual

6

Summary of Contents for QSC(LP)-100






































Reviews:

No comments

Brands by name

Popular brands

Load more brands