manualshive.com logo in svg

Quatech QSC(LP)-100, User Manual

Share
Download
Quatech QSC(LP)-100 User Manual Download Page 20

Figure 12--- Windows  Device Manager

6. The QSC(LP)-100 serial ports are also listed under the group Ports (COM

and LPT).  Windows 95 does not assign COM1-COM4 to ports addressed
at nonstandard locations.  The QSC(LP)-100 ports will be enumerated
starting with COM5 (or higher) even if lower logical numbers are
available.

7. Select any of the Quatech Serial Ports listed under the group Port (COM

and LPT) and click the "Properties" button.  This action opens a properties
dialog for the specific COM port on the QSC(LP)-100.

8. Click the "Port Settings" tab and then click the "Advanced" button.  The

QSC(LP)-100 driver will display a custom Advanced Port Settings control,
which allows the ports UART compatibility mode and FIFO threshold
levels to be configured.  The threshold values of full-scale for the transmit
buffer and 3/4-scale for the receive buffer shown below are optimal for
most applications.  Note that the FIFO option for each of the
QSC(LP)-100's two ports is configured independently.

QSC(LP)-100 User's Manual

20

Summary of Contents for QSC(LP)-100






































Reviews:

No comments

Brands by name

Popular brands

Load more brands