Quatech MPAP-200 User Manual Download | Manualshive

Page: 14 / 64

background image

The enabler requires a single desired configuration to be provided on the command line.

The card will not be configured if the desired configuration is not provided. The desired
configuration must be enclosed in parentheses and it contains parameters separated using
commas (no spaces). In the descriptions below, replace the '#' symbols with the appropriate
numeric values.

MPAP1EN (S#,B#,I#,W#)

S#

The PCMCIA socket into which the MPAP-200 will be inserted. This value is a
decimal number ranging from 0 to 15. This parameter is always required when
configuring a card.

B#

The base I/O address of the MPAP-200. This number must be a three-digit
hexadecimal value ending in 0. This parameter is always required when
configuring a card.

I#

The interrupt level (IRQ) of the MPAP-200. This decimal number must be one of
the following values: 3, 4, 5, 7, 9, 10, 11, 12, 14, 15, or 0 if no IRQ is desired.
This parameter is always required when configuring a card.

W#

(optional)

The base address of the memory window used by the enabler. This

two-digit hexadecimal number can be one of the following values: C8, CC, D0
(default), D4, D8, or DC. Use D4 for a memory window at segment D400, D8 for
a memory window at segment D800, etc. If this parameter is omitted, the default
setting of D000 will be used.

14

«
...
12
13
14
15
16
...
»

Summary of Contents for MPAP-200

































































Reviews:

No comments

Related manuals for MPAP-200

Brand: D-Link Pages: 15

AirPlus G DWL-G510

Brand: D-Link Pages: 12

RANGEBOOSTER N 650

Brand: D-Link Pages: 24

TL-PA201 STARTER

Brand: TP-Link Pages: 2

Dura-Flex Coupling

Brand: TB Wood's Pages: 4

Baby Trend Expedition U-shaped Support Bar (facing up)Baby Trend Flex LocBaby Trend GabriellaBaby Trend Stride SportBaby

Brand: Baby Jogger Pages: 5

CoolPower EPS100

Brand: Waeco Pages: 88

GA311 GA311 GA311

Brand: NETGEAR Pages: 2

Brand: Devolo Pages: 16

Brand: Pace Pages: 15

SNG 12/1500-OW-N

Brand: VOLTCRAFT Pages: 4

TRIPP LITE U444-06N-DP4K6B

Brand: Eaton Pages: 4

Brand: Crown Pages: 6

Brand: Asante Pages: 2

Brand: Asante Pages: 60

Brand: Renesas Pages: 2

Brand: Manhattan Pages: 2

Pavilion zx5000 - Notebook PC

Brand: Compaq Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands