Quatech DSP-100, User Manual

Page: 10 / 40

2.1.2.2 Example 2
DEVICE = C:\DSP-100\DSP130CL.SYS (b290,i11)
In example 2, a single command line argument is provided. The Client Driver will attempt to
configure a DSP-100 inserted into any socket with a base address of 290H and IRQ 11. If
address 290H or IRQ 11 is unavailable, the DSP-100 will not be configured.
2.1.2.3 Example 3
DEVICE = C:\DSP-100\DSP130CL.SYS(s0,b300,i5,o2)
In example 3, a single command line argument is provided. The Client Driver will attempt to
configure a DSP-100 inserted into socket 0 with a base address of 300H and IRQ 5. If address
300H or IRQ 5 is unavailable, the DSP-100 will not be configured. In addition, if aDSP-100 is
inserted into any other socket, it will not be configured.
2.1.2.4 Example 4
DEVICE = C:\DSP-100\DSP130CL.SYS(i5,h,b300)
In example 4, a single command line argument is provided. Because the parameter order is not
significant, the Client Driver will attempt to configure a DSP-100 inserted into any socket with a
base address of 300H and IRQ 5. If address 300H or IRQ 5 is unavailable, the DSP-100 will not
be configured.
2.1.2.5 Example 5
DEVICE = C:\DSP-100\DSP130CL.SYS (b300,i5) (i10) ( )
In example 5, three command line arguments are provided. The Client Driver will first attempt
to configure a DSP-100 inserted into any socket with a base address of 300H and IRQ 5. If
address 300H or IRQ 5 is unavailable, the Client Driver will proceed to the second command line
argument and attempt to configure the card with a base address assigned by Card and Socket
Services and IRQ 10. If IRQ 10 is also unavailable, the Client Driver will proceed to the third
command line argument and attempt to configure the DSP-100 with a base address and an IRQ
assigned by Card and Socket Services.
2-5 DSP-100
(Rev. G and later)
User’s Manual