manualshive.com logo in svg

Quatech DSCLP-200, User Manual

Share
Download
Quatech DSCLP-200 User Manual Download Page 12

2.3.1 CTS0_SEL, CTS1_SEL (J10, 17)

With NO jumpers on J10 or J17  the mode selection is CTS=AUXIN.

With Jumpers installed the mode selection is CTS=RTS

.

2.3.2 AUX0_SEL1,0, AUX1_SEL1,0 (J12, 11, 19, 18)

With NO jumpers on J12 or J19  the mode selection is AUXOUT=RTS.

With Jumpers installed on J12 or J19  and NO jumpers installed on J11 or J18, the
mode selection is AUXOUT=TCLK

. 

With Jumpers installed on J12, J11 or J19,

J18, the mode selection is AUXOUT=AUXIN

.

2.3.3 RCLK0_SEL,  RCLK1_SEL (J13, 20)

With NO jumpers on J13 or J20  the mode selection is RCLK=TCLK.

With Jumpers installed on J13 or J20   the mode selection is RCLK=AUXIN

. 

2.3.4 TGL0_SEL1,0, TGL1_SEL1,0 (J15, 14, 22, 21)

With NO jumpers on J15,14,  or J22,21  the mode selection is TXEN=1.

With Jumpers installed on J14 or J21  and NO jumpers on J15 or J22, the mode
selection is TXEN=DTR

. 

With Jumpers installed on J15 or J22  and NO jumpers

on J14 or J21, the mode selection is TXEN=RTS

.

 With Jumpers installed on J15,

J14 or J22, J21, the mode selection is TXEN=”Auto Toggle”

.

2.3.5 RXEN0_SEL,  RXEN1_SEL (J16, 23)

With NO jumpers on J16 or J23  the mode selection is RXEN=1. With

Jumpers installed on J16 or J23   the mode selection is RCLK=!TXEN

.

DSCLP/SSCLP-200/300 User's Manual

12

Summary of Contents for DSCLP-200

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands