background image

                

  W A R R A N T Y   I N F O R M A T I O N

          Q u a t e c h   I n c .   w a r r a n t s   t h e      D S - 2 0 2   /   D S - 3 0 2      
t o   b e   f r e e   o f   d e f e c t s   f o r     o n e   ( 1 )  y e a r       f r o m   t h e
d a t e   o f   p u r c h a s e .     Q u a t e c h   I n c .   w i l l   r e p a i r   o r   r e p l a c e
a n y   b o a r d   t h a t   f a i l s   t o   p e r f o r m   u n d e r   n o r m a l   o p e r a t i n g
c o n d i t i o n s   a n d   i n   a c c o r d a n c e   w i t h   t h e   p r o c e d u r e s
o u t l i n e d   i n   t h i s   d o c u m e n t   d u r i n g   t h e   w a r r a n t y   p e r i o d .
A n y   d a m a g e   t h a t   r e s u l t s   f r o m   i m p r o p e r   i n s t a l l a t i o n ,
operation, or general misuse voids all warranty rights.

     Although every attempt has been made to guarantee
t h e   a c c u r a c y   o f   t h i s   m a n u a l ,   Q u a t e c h   I n c .   a s s u m e s   n o
l i a b i l i t y   f o r   d a m a g e s   r e s u l t i n g   f r o m   e r r o r s   i n   t h i s
d o c u m e n t .     Q u a t e c h   I n c .   r e s e r v e s   t h e   r i g h t   t o   e d i t   o r
append to this document at any time without notice.

          P l e a s e   c o m p l e t e   t h e   f o l l o w i n g   i n f o r m a t i o n   a n d
r e t a i n   f o r   y o u r   r e c o r d s .     H a v e   t h i s   i n f o r m a t i o n
available when requesting warranty service.

DATE OF PURCHASE:    

                                                             

MODEL NUMBER:   

D S - 2 0 2   /   D S - 3 0 2                                      

PRODUCT DESCRIPTION: 

  D U A L   C H A N N E L   R S - 4 2 2   /   R S - 4 8 5            

                     

A S Y N C H R O N O U S

  C O M M U N I C A T I O N

  B O A R D    

SERIAL NUMBER:
                                                                     

I B M T M ,   P C / X T T M ,   P C / A T T M ,   a n d   P S / 2T M   a r e   t r a d e m a r k s   o f
International Business Machines.

                           i

Summary of Contents for DS-202




























Reviews: