AirborneDirect™ Ethernet Adapter Quick Start Guide
Quatech, Inc.
940-0193-210
2
February 2011
Getting Started:
1
Open the AirborneDirect™ packaging and locate the Install CD.
2
Place the CD in the CD/DVD drive of the laptop or desktop you will be using to configure the
AirborneDirect™ device. Follow the on screen directions for installation of the appropriate device
software and documentation.
3
Connect the Ethernet cable on ABDG to an Ethernet port on the laptop or desktop system.
4
Apply power to the ABDG-ET-DP5XX/IN5XXX.
5
The unit will boot and display one of the following LED patterns:
ABDG-ET-DP5XX
Associated (Open Network)
Not Associated
POWER:
Green
Green
LINK :
Green
Red (Periodic Blinking)
COMM:
Red
Red
ABDG-ET-IN5XXX
COMM:
Off
LINK :
Off
POST:
Orange
POWER:
Blue
6
Run the Airborne Management System application. This was installed during the CD installation and a
menu item will be found in the Airborne folder located in the programs directory of your system.
When the application opens the following dialog will be displayed:
Select Group Name:
manuf
and enter Group Password:
dpac
7
The AMC will load and discover the attached device.
