QTrack
™
Antenna System
9
Quasonix, Inc.
4 Operating Instructions
4.1 Local Antenna Control Unit (ACU) Operation
The QTrack
™
Antenna System is operated via the PC Interface. With a keyboard, monitor, and mouse, users may
connect to the ACU and run the QTrack
™
client software which is located on the desktop.
4.1.1
Remote ACU Operation
The Local ACU and connected QTrack
™
System can be controlled remotely by installing the client software on the
remoted device and connecting to the ACU through an Ethernet connection. Figure 8 and Figure 9 show the
connections necessary for remote access.
4.1.1.1
Remote Access Set Up, LAN
1.
Set remote PC IP address to 10.1.1.11.
2.
Install client software on a remote PC.
3.
Open QTrack ACU desktop icon on remote PC. ACU should automatically connect when the application
opens.
4.
A small window displays while attempting to connect. If connection never occurs, click on the ACU
Settings button, and ensure QTrack server IP is set to 10.1.1.10.
When connected, full access to ACU functionality should be available from the remote PC.
Figure 8: Typical System Configuration, Remote Operation
—
LAN Access
4.1.1.2
Remote Access Set Up, WAN
1.
Configure the Router to connect 10.1.1.10 on the LAN side.
