User Manual
24V OUTPUT – SERIES CONNECTION (voltage increase current remain)
24V OUTPUT – SERIES/PARALLEL CONNECTION (both voltage and current increase)
SAFETY INSTRUCTION:
Please note the following instructions should be carefully followed as any incorrect installation or misuse of
the inverter may cause harm to user and damage apparatus.
-
Do not connect any other form of input power other than DC power that is within the inverter’s
acceptance range
-
Ensure the ventilation duct on both front and back panels are clear of blockage when the inverter
is in use
-
Please use appliance with power rated within the inverter power range.
Do not attempt to overload the inverter constantly
-
Do not pull on cable when unplugging from the inverter, always grip firmly on the plug
-
To avoid shock hazard, always ensure inverter and DC power supply (if apply) are switched off
before inserting the AC plug to the inverter
-
Strictly for indoor use only, avoid exposing the unit to any heat source, sunlight, dust, moisture or
flammable substances
-
It is normal that the inverter will become hot while in use, please avoid touching the unit
-
Do not drop the inverter
-
Do not place any object on the inverter
-
Always connect/set up with cable and accessories supplied and follow the instructions carefully.
Any use of third party accessories may cause damage and result in injury
-
Do not attempt to service or disassemble the inverter. Any attempt to do so can cause injury to
user including death from exposure to high voltage. If problems are experienced from the unit
