Quasar SQ3204, Instruction Manual

Page: 21 / 45

19
Before consulting service personnel, check the following chart for
possible solutions.
PROBLEM SOLUTION
TV will not turn on
Ɣ
Make sure the power cord is plugged in.
Ɣ
The batteries
in the remote control may be Exhausted; replace the
batteries.
No picture, no sound
Ɣ
Check the cable between TV and antenna/ external AV
device.
Ɣ
Press the power button on the remote.
Ɣ
Press the
SOURCE button the remote, then press the “
Ÿ
/
ź
”button
repeatedly to select the TV source.
Poor picture, sound OK
Ɣ
Check the cable between TV and antenna/ external AV
device.
Ɣ
Try another channel, the station may have
broadcast difficulties.
Ɣ
Adjust the brightness/contrast in
the Video menu. Check that the unit is set to NTSC
Audio noise Ɣ Move any infrared equipment away from the TV.
The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated
technology to produce. However, there may be
a small number of bright or dark pixels on the
screen. These pixels will have no impact on the performance of the product.