Quasar CB-6204/CB-6208 User and Installation Guide
52
9.3.4
Events Setup
The
Events Setup
tab includes the following screens:
9.3.4.1
IO
The
IO
screen is used to control input and output alarms and messages, which are generated when
an event is recognized by the system.
Figure 52: IO Screen
9.3.4.1.1
Alarm Switch
The Administrator can select from the following options:
Select
Off
to disable an alarm.
Select
On
to enable an alarm (default setting).
Select
By
Schedule
to set a schedule. Then click
Please Select
to select up to 10 schedules
from the drop-down list that opens. The selected schedules are displayed in the
Please
Select
text box. To set a schedule, open the
Click
SAVE
after configuring the settings.
