Quasar Science Rainbow 2, Quick Start Manual

Page: 33 / 185

Power On Mode
Power On Mode is used to tell the light when it should turn on. It can be set to “with Input” or “with Button”
When set to “with Button”, after connecting the light to a power source the Power Button must be pressed. This is recommended for normal operation.
When set to “with Input,” the light will turn on when power is applied, bypassing the power button. This mode is preferred when the light is rigged in a set or a spot
that is remote or difficult to reach. In a Studio setting this would be the preferred method to have the light turn on.
Rainbow 2
33
English