Wireless Control Menu
> Wireless Mode
> Wireless DMX
Lumen Radio CRMX wireless DMX. Press and hold
to Clear. Tap transmitter to pair.
> Bluetooth
Enable the light to connect over Bluetooth.
> WiFi
Enable the light to connect to a wireless network to receive Art-Net over WiFi.
> Off
Turns off all Wireless functionality.
> Wireless DMX Settings*
Shows the Hardware and Firmware of the CRMX TimoTwo.
> WiFi Settings*
Connect to a Wireless Network to receive Art-Net over WiFi. Turn the light into a
> Status Lights On/Off
Turns off status lights for use when light is seen on camera.
> Reset Wireless Settings to Default
Reset All Wireless Settings to factory default.
TIP
Double Tap
to bring up the Wireless Control menu.
*See the full Manual for Detailed Descriptions of the Wireless DMX Settings and WiFi Settings.
Rainbow 2
29
English
Summary of Contents for Rainbow 2
Page 1: ...Quick Start Guide Rainbow 2 LED Linear Light...
Page 28: ...Ethernet Mode Choose the Ethernet protocol sACN Art Net sACN Only Art Net Only Rainbow 2 28...
Page 74: ...Ethernet Mode W hlen Sie das Ethernet Protokoll sACN Art Net nur sACN nur Art Net Rainbow 2 74...
Page 164: ...Ethernet Mode Scegli il protocollo Ethernet sACN Art Net solo sACN solo Art Net Rainbow 2 164...