Quartzlock A5-32 User Handbook Manual Download Page 4

 

 

Model A5-32 Operation And Service Manual

 

A5-32 Manual 29 April 2002 

Page 4 of 10

 

For continued protections against fire, replace the line fuse(s) with fuses of the same current rating 
and type (for example, normal blow time delay). Do not use repaired fuses of short-circuited fuse 
holders. 

Voltage, Frequency and Power Characteristics 

Voltage 220-240V AC  

Frequency 40-50Hz   

Power characteristics 500mA Max

  

Environmental Conditions  

Temperature 

Operating (ambient) 

-10°C to +55°C (-65 to +65 op) 

Storage 

-40°C to +85°C 

Magnetic Field 

Sensitivity 

2x10

-11

/ Gauss 

Atmospheric Pressure 

-60m to 4000m 

 <1x10

-13

/ mbar 

Replaceable Fusing Characteristics 

800mA time-lag HBC 

Cleaning Instructions 

To ensure long and trouble operation, keep the unit free from dust and use care with liquids around 
the unit. 

Be careful not to spill liquids onto the unit. If the unit does get wet, turn the power off immediately 
and let the unit dry completely before turning it on again. 

Clean with a damp (with water) cloth. 

Never spray cleaner directly onto the unit or let liquid run into any part of it. Never use harsh or 
caustic products to clean the unit. 

Summary of Contents for A5-32











Reviews: