Q1601 & Q1602 System Manual
V1.64
21
STANDARD CONTROL SYSTEM: ANALOG VIDEO
There are a number of jumper links on the main video module, which are used to
determine how the router functions.
There are two main operating modes, called S
tand-alone
and
Stack.
In the
Stack
mode
two or more 16x1 routers are used together, for instance, when the video and two levels
of audio are provided by one router and a further two levels of audio by another router. In
this application one router is set to be a master and the other as a slave. Figure 5 and
Figure 6 show the link settings for these modes. Refer to Figure 12 to find the exact
location of the jumper links on the module.
In addition there are modes to determine control panel operation, shown in the table
below. Note that the functions of the jumper links are different if the Advanced Controller
is fitted.
Mode
LK 5
LK 6
LK 7
17 button panels: CP-1601A-(L)P or custom panels
16x1, Lock/Enable *
A
A
A
16x2, Destination Toggle
A
A
B
8x2**, Lock/Enable *
B
A
A
16x1 with Joystick operation
B
A
B
Dual 8x1***
B
B
A
20 button panels: custom panels only
16x1, 3 Levels, Lock
A
B
A
16x1, 3 Levels, Destination Toggle
A
B
B
Not used
B
B
B
* Selecting jumper links in the control panel makes the choice between
Lock
and
Enable
.
** This mode is an 8x2 router with the panel split to give 8 buttons controlling
destination 1, and the other 8 buttons controlling destination 2. Note that the
chop
function is not supported in this mode.
*** This mode is two 8x1 routers with the panel split to give 8 buttons controlling
source 1-8, destination 1, and the other 8 buttons controlling source 9-16,
destination 2. Note that the
chop
function is not supported in this mode.