Appendices:
Page 13
PM9605 Revision 1, 9605 Version 36.1.1
The remainder of the error codes are configuration or test mode oriented. These errors also require assistance
from the operator.
D_File = Dialogue File WD File = Watchdog File
Error
Description
Possible Cause
41
D_file does not exist.
D_file not a bit file.
Not enough D_file elements.
The D_File entered during setup does not exist in the PLC, or it
is not a bit file. The bit file may not be large enough to support
the operating mode selected during setup.
42
Failure writing D_File.
The 9605 was unable to change and update its D_file.
Restart 9605 and check connection of comm. cable.
44
WD file does not exist.
WD file not a timer file.
Not enough WD file elements
The WD File entered during setup does not exist in the PLC, or
it is not a timer file. The timer file may not be large enough to
contain the element # selected during setup.
47
Duplicate node address.
The 9605 station address entered during setup is occupied by
another device on a network.
81
Channel A no byte received.
The communication test has failed. Cycle power to the 9605
and try the test again. If the problem still exist contact Quartech
for repair information.
82
Channel B no byte received.
If you encounter any of these errors and cannot get the 9605 to recover after checking into the causes contact the
Quartech Corporation technical staff for more information.
For Technical Assistance please call:
Quartech Corporation
50680 Corporate Drive
Shelby Township, MI 48315-3107
Technical Assistance: (810) 997-9400
Fax: (810) 997-9407
Summary of Contents for 9605
Page 18: ......