background image

TIME Key-press

Press “TIMER”,timer and ration. Show circularly the picture 2 and picture 3,it mean 

the machine will be worked as the setup of picture 2, 3, 4 and 5. Press the “TIMER” 

again,return to the main menu.

VOLUM Key-press

Press “VOLUM”,the machine start to working, show the picture 1 spary time. But sorry this 

machine can not adjust the smoking output. Press the “VOLUM” again,return to the main 

menu.

MANUAL Key-press

Press “MAUAL”,the machine can set the LED color and Function.

Througt “UP “ ”DOWN” to choose the mode 0~9, refer picture 5 to show you how 

to operation.

DMX control

DMX have priority when the machine put in the XLR socket.(it means the machine is 

controlled by DMX,the data will be connected the DMX, all the key-press on the machine 

will be stop using.

The machine have 6CH of DMX. You can connect several piece LED up fog machine with 

XLR signal line to work together!

CH1 Smoking

CH2 

Green color

CH3 

Blue color

CH4 

Red color

CH5 

Seven color change

CH6 

Seven color auto and speed

CH7 

Seven color strobe and speed

CARE AND MAINTENANCE

It can reduce spare parts change and repair charge if you clean the machine termly.

 

- Remove the filter,which protects the fan against dust and dirt,from time to time 

  and clean it.

- Check the state of the fluid filter from time to time and clean or replace it 

  when necessary.

- After several hours of operation,some droplets of condensation will have formed 

  at the nozzle. That is normal and not a malfunction.

- Remove fluid droplets at the nozzle only when the machine has completely cooled off. 

- Please keep the liquid clean.

   

4

ENGLISH

Summary of Contents for FLARE RGB













Reviews: