Quark-Elec Manual
https://www.quark-elec.com
8 of 15
2016
V1.0
2.4 WiFi output (Ad-hoc mode)
15 seconds after QK-A031 has been powered up, the operator should be able to scan and find
a WiFi network (SSID) similar to ‘QK-A031xxxx’ using WiFi enabled devices such as computers,
mobile phones or tablets.
Figure 3 Operating in Ad-hoc mode
Connect the device/s to ‘QK-A031xxxx’ with ‘88888888’ as the default password. Set the
protocol as ‘TCP’, IP address as ‘192.168.1.100’ and the port number as ‘2000’ in the chart
software.
Item
Setting
SSID
Similar to ‘QK-A031xxxx’
Protocol
TCP
IP address
192.168.1.100
Port
2000
With the above settings, wireless connection should be set and the operator will be able to
receive the output messages through the chart software. the operator can always check the
wireless connection with TCP/IP port monitoring software as shown below:
