manualshive.com logo in svg

Quark-Elec QK-A026+, Manual, Page: 18 / 22

Share
Download
Quark-Elec QK-A026+ Manual Download Page 18

 
 

QK-A026-plus Manual 

 

V 1.0 

18 of 22 

2020 

 

4.5.  USB - Monitoring NMEA Messages 

Connect A026+ 

and then click ‘Open port’, all the sentences will be displayed in the application. 

 

 

Figure 16: Monitor via USB 

 

4.6.  NMEA 2000 output format 

NMEA 2000 bus data can be sent out via WiFi and USB. The operator can setup the output format 

through the configuration tool. It can be PCDIN (Raw NMEA 2000 data in NMEA 0183 format), NMEA 

0183(converted PGNs) or standby mode (disable the output from NMEA 2000 bus). 

 

Once settings are complete the user must click 

‘Config’ and then click ‘Disconnect’. Please 

restart the unit by un plugging the unit from Power. The unit is now ready for use.

 

5. Upgrading firmware 

The current firmware version can be verified through the configuration tool (When connected, the 
firmware version will show in the bottom of the Configuration software window). 
 
To upgrade the firmware, 
1. 

Power up your A026+ and then connect it to a Windows computer via USB. 

2. 

Run the Configuration software. 

3. 

Ensure the configuration tool is connected to the A026+, and then click Ctrl+F7. 

4. 

A new Window will pop up with a drive named ‘STM32’ or similar. Copy the firmware into this drive 
and wait around 10 seconds to make sure the full file has been copied. 

5. 

Close the window and the Configuration software. 

6. 

Re-power the A026+, and the new firmware will be active. 

 

6. Chart software 

There is a wide range of chart software available, for example OpenCPN, Navionics. 
 

•

 

https://opencpn.org/OpenCPN (Open Chart Plotter Navigator) is a free software project to create 
concise chart plotter and navigation software, for use underway or as a planning tool. OpenCPN 
is developed by a team of active sailors using real world conditions for program testing and 
refinement.  

•

 

https://www.navionics.com/gbr/apps/navionics-boating 

 

Summary of Contents for QK-A026+























Reviews:

No comments