1. [PTT]
Push and hold to transmit; release to receive.
2. Channel UP / DOWN Keys
[▲]/[▼]
→
Push either key to change the operating channel, set mode settings, etc.
→
When the favorite channel function is turned ON, push either key to select the
favorite channels in the selected channel group in sequence.
3. Transmit Power Key [HI/LO]
→
Push to toggle the power high and low.
·
Some channels are set to low power only.
→
While push and hold [HI/LO], turn power ON to toggle the microphone lock function
ON and OFF.
■
Function display
1. Channel Number Readout
→
Indicate the selected operating channel number. (Refer to channel list)
→
In set mode, indicate the selected condition.
2. Channel Group Indicator
Indicate whether a U.S.A. “U”, International “I” or Canadian “C” channel is in use.
3. Channel Comment Indicator
→
Channel comment appears if programmed.
→
“LOW BATTERY” scrolls when the battery voltage drops approx. 10.8V DC or
below.
→
“SC” blinks during priority scan; “SCAN” blinks during normal scan.
→
“DW” blinks during Dualwatch; “TW” blinks during Tri-watch.
4. DSC Indicators
→
“DSC” appears when a DSC call is received.
→
“POS REPLY” appears when a position reply call or position report reply call is
received.
5. GPS Indicator
→
Appears while valid position data is received.
→
Blinks when invalid position data is received.
→
Disappears when no GPS receiver is connected.
6. Weather Channel Indicator
→
“WX” appears when a weather channel is selected.
→
“WX ALT” appears when the weather alert function is in use; blinks when an alert
tone is received.
