③
Push [
▲
] or [
▼
] to select the desired pre-programmed individual address.
·
The ID code for the position report call can be set in advance.
④
Push [DSC] to enter the standby condition for Position Report call.
·
Channel 70 is selected and “READY” appears.
⑤
Push [DSC] to transmit the Position Report call.
⑥
After the Position Report call has been transmitted, stand by on Channel 70 until an
acknowledgement is received.
·
“WAIT ACK” scrolls at the channel comment indicator.
⑦
Push any key to exit the condition and return to the normal operation.
◆
Receiving a Position Request call
While monitoring Channel 70 and a Position Request call is received:
①
“DSC” appears and “RCV POS REQUEST” scrolls at the channel comment indicator.
②
Push any key to stop the beep.
③
Push [DSC] to reply to the call; Push any other key to ignore the call.
