16
Monitor
If the monitor function is set by your dealer, press the programmed Monitor key while in
receive mode to hear activities on the current channel.
The Monitor key is programmable with one of the following four operating modes by your
dealer.
1. Carrier Squelch- Momentary
Hold down the [MONI] key to open CTCSS/CDCSS/2-Tone signalling squelch, Release
to close the signalling squelch.
2. Carrier Squelch-Toggle
Press the [MONI] key to open CTCSS/CDCSS/2 -Tone signalling squelch. Press again
to close the signalling squelch.
3. Squelch Off-Momentary
Hold down the [MONI] key to open carrier squelch; Release to close the carrier squelch.
4. Squelch Off - Toggle
Press the [MONI] key to open carrier squelch. Press again to close the carrier squelch.
Scan
■
Scan Type
1. Single Zone Scan
Radio scans all the channels that added into the scan list on the current zone.
2. Multi Zone Scan
Multiple zones that added into a multi scan list can be scanned. All channels within all
the zones that added into the scan list can be scanned.
■
Scan Start
1. Add one or several non-priority channels into the scan list.
2. Press the programmed Channel Scan key to initiate scan from the current channel,
and ascends through the channel numbers in scan list. The LCD displays the “SCAN”
icon (“-SCAN-” indicates multi zone scan).
■
Scan Cease
Scanning pauses or ceases upon the following:
1. Upon repress the programmed Channel Scan key, scanning ceases, and the radio
exits the scan mode.
2. Activate the Monitor function.
3. Receives carrier that satisfy radio un-mute condition.
■
Scan Resume
If scanning pauses on an active channel, the scanning will resume according to the scan
resume mode. The scan resume mode is programmable by your dealer for Carrier
operated scan or time operated scan.
