8
Assembly Instructions
STEP 2: Connect Bypass Valve to Control Valve
A.
Attach bypass valve to control valve by firmly pushing inlet and outlet of bypass valve into control valve. Install
plastic clips to secure bypass.
B. Connect inlet and outlet elbow connectors to pipe connection end of bypass valve. Install plastic clips.
C. Connect the signal wire ends from control valve and bypass. Tighten nut.
D. Verify water meter probe is installed in probe port on control valve.
Top view of bypass assembly
Outlet
Inlet
Clip
Signal wire
Outlet elbow
connector
Inlet elbow
connector
Water meter
probe
