Quantum SuperLoader3 Magazine and Magazine Blank Removal/Replacement Instructions
Document 81-81314-01 B01
October 2005
6
Replacing a Magazine or Magazine Blank
Changing the orientation of a magazine
0
1
Remove the two screws that attach the handle to the front of the
magazine.
Figure 2 Removing the
Screws from the Handle
2
Unsnap the handle carefully, being careful not to break the hinge.
3
Rotate the magazine 180 degrees so that what was the front of the
magazine is now the back.
4
Attach the appropriate left or right handle to the front of the rotated
magazine.
5
Snap the handle back onto the front of the magazine.
6
Install the two screws to attach the handle securely to the magazine.
Changing the orientation of a magazine blank
0
1
Remove the two screws that attach the handle to the front of the magazine
blank.
2
Unsnap the handle carefully, being careful not to break the hinge.
3
Rotate the magazine blank 180 degrees so that what was the front of the
magazine is now the back.
4
Add the appropriate right or left handle to the front of the rotated
magazine blank.
5
Snap the handle back on the front of the magazine blank.
6
Install the two screws to attach the handle securely to the magazine blank.
Screws
