Chapter 3: Basic System Operations
Shutting Down the G300
StorNext G300 Gateway Appliance Hardware Guide
31
To shut down the system:
1
Open an SSH connection to the system using IP address
10.17.21.1
on either the MDC/Metadata or LAN Clientnetwork.
Note:
Use the IP address assigned if different from the default
used here.
2
Enter
stornext
for the username at the prompt.
3
Enter the password for the
stornext
user account.
4
At the command prompt enter the following to gain root user
access:
5
Enter the password for the
stornext
user account again when
prompted.
6
Press Enter.
7
Enter the following:
8
9
Enter the following:
Note:
You will know the system is shut down when your monitor
goes blank, or you lose your connection with the system.
sudo rootsh
service cvfs fullstop
/sbin/poweroff