StorNext AEL500 Mini Archive Essentials Guide
6-67853-02
October 2014
Install the StorNext AEL500 Mini Archive EDLM Hardware Add-On Kit
13
3
Cable the EDLM drive to the FC I/O blade.
• “About EDLM” in the
Scalar i500 User’s Guide.
Figure 1 Cabling the StorNext AEL500 Mini Archive and EDLM
Hardware Add-On Kit
4
Cable the upper Ethernet port on the EDLM
Hardware Add-On Kit module to an internal
Ethernet port on the StorNext AEL500 Mini
Archive LCB.
• See
.
• “Connect the Library Cables” in the
Scalar i500 Getting
Started Guide.
To perform this step:
See the following documentation:
Gigabit Ethernet port
Module
terminator
Module
terminator
Module-to-
module cable
Power
cords
Expansion module UPPER port
Ethernet cable
Module
Ethernet
cable
EDLM drive-to-
FC I/O blade
cable
User drives-to-
MDC fibre
channel cables
User drive-to-MDC
fibre channel cable
