![background image](http://html1.mh-extra.com/html/quantum/std2401lw/std2401lw_installation-instructions-manual_4010096003.webp)
Table Tape Drive
3
DDS-4/DAT 72
Figure 2 SCSI Termination
Examples of the External Tape
Drive
5
Check the SCSI termination.
Figure 3 SCSI Termination
Examples of the External Tape
Drive
6
Connect a power cable to the AC power connector on the back of the tape drive.
Connect the other end of the power cable to a working AC outlet.
7
Turn on the computer, turn on the tape drive, and verify that the tape drive is
operating properly.
8
Register your tape drive at
http://www.quantum.com/registration
.
Installing a Tabletop Tape
Drive with a USB
Connector
0
To install the tabletop tape drive with a USB connector:
1
Unpack the contents of your drive package. If any item is damaged, please contact
your place of purchase immediately.
68-pin wide SCSI
connectors
SCSI ID selector
External tape drive
SCSI controller
(termination enabled)
Example 1: SCSI termination in a
system that has only external SCSI devices.
External SCSI device
SCSI device
(termination
enabled)
External tape drive
SCSI controller
(termination disabled)
Example 2: SCSI termination in a system
that has both internal and external SCSI devices.
Internal SCSI device
(termination enabled)
SCSI terminator
Summary of Contents for STD2401LW
Page 51: ...51 DDS 4 DAT 72 7 5 3 5 5 25 6 7 a SCSI LVD 16 Wide Wide SCSI SCSI LVD SCSI SCSI SCSI b 4 AC...
Page 62: ...62 DDS 4 DAT 72 7 5 3 5 5 25 6 7 a SCSI LVD 16 SCSI SCSI LVD SCSI SCSI SCSI b 4...
Page 73: ...73 DDS 4 DAT 72 7 5 3 5 5 25 6 7 a SCSI SCSI LVD 16 SCSI LVD SCSI SCSI b 4...
Page 84: ...84 DDS 4 DAT 72 7 5 3 5 5 25 6 7 a SCSI LVD 16 SCSI SCSI LVD SCSI SCSI SCSI b 4...