2
© January 2005, ADIC
Compatibility Matrix
Use the following tables for system compatibility. Tests have shown that the components listed below
interoperate effectively when properly configured. Visit
www.adic.com
for the most current version of this
matrix.
Known Issues
Advisements pertaining to the latest release of SNC 450x Firmware v. 2.16 are as follows.
Table 1
Compatibility Matrix
Configuration
Tape Library
Host
Server
ISV Application
GbE HBA
Model
Tape
Drives
Platform
Make/Model
1
,
2
1. CA ARCserve Version 9.01 requires patches through QO51045.
2. Veritas Backup Exec Version 9.1, and patches 267180, 267250, 267682, 265501. Veritas recommends patch 268600 if
Intelligent Disaster Recovery (IDR) is used.
Make
Model
3
,
4
3. Use the following code levels: HBA driver, 1.20.0.39; HBA Firmware, 1.20.41; HBA BIOS,1.2.40.
4. A host that uses this HBA with Veritas Backup Exec must first be attached to a Gigabit Ethernet switch before being connected
to the SNC 450x. Otherwise, the software erroneously recognizes the media changer as offline.
SNC 4501
Scalar 24
SCSI LTO-2
Win2003
Win2000
CA ARCserve
9.01 or 11.1
Veritas Backup Exec
TM
BakBone Netvault 7.1
Commvault Galaxy 5.0
Legato Networker 7.1.2
1 Gb
Adaptec 7211C
SNC 4501
Scalar 24
SDLT-320
Win2003
Win2000
CA ARCserve 11.1
1 Gb
Adaptec 7211C
SNC 4500
Scalar 100
SCSI LTO-2
Win2003
Win2000
CA ARCserve
9.01 or 11.1
Veritas Backup Exec
BakBone Netvault 7.1
Commvault Galaxy 5.0
Legato Networker 7.1.2
1Gb
Adaptec 7211C
SNC 4500
Scalar 100
SDLT-320
Win2003
Win2000
CA ARCserve 11.1
1Gb
Adaptec 7211C
Table 2
Known Issues
Change
Request
Number
Description
Workaround
PR00212
If the management port (mp) experiences
excessive traffic, for example a Denial of Service
(DoS) attack, the CPU cycles required to service
this increase in traffic can impact performance.
Limit mp exposure to external
network traffic.
PR00223
The SNC 4500 cannot download library firmware.
Use the library serial port or RMU
to load library firmware.
