Quantum Scalar 50 User Manual Download Page 199

Page: 199 / 290

Chapter 5 Troubleshooting

Interpreting System LED Status

Quantum Scalar 50 User’s Guide

175

Power Supply LED Status

The power supplies have an LED indicator reporting the power supply

state (see

table 39

Table 39 Power Supply LEDs

LED Status

Problem/Status

AC OK solid green

Power has been applied to the power supply and

is within specifications.

AC OK off

The power supply is not attached to a power

source or the power source has failed.

DC OK solid green

The power supply is providing DC power to the

library normally.

DC OK off

The power supply has failed.

LEDs

Summary of Contents for Scalar 50



































































































































































































































































































Search results

Summary of Contents for Scalar 50

Reviews:

Related manuals for Scalar 50

Brands by name

Popular brands

Quantum Scalar 50, User Manual

Search results

Summary of Contents for Scalar 50

Reviews:

Related manuals for Scalar 50

Brands by name

Popular brands