Quantum QT-730 Series, Installation And Operation Manual

Page: 42 / 46

Model QT-730 Radiographic Table
A complete series of inspections and functional checks was conducted at the
time of installation to insure proper operation of the system. The following in-
spection and adjustment procedures are recommended to maintain the system
in its original operating condition.
•
Check for evidence of loose hardware or loose wires.
•
Verify that all ground conductors are properly and securely installed and
free of corrosion or damage.
•
Check all electrical cabling and wiring for wear and fraying.
•
Check all bearings and bearing surfaces for cleanliness and corrosion.
• Conduct a general inspection for worn or damaged parts.
•
Visually inspect for wear and cleanliness.
• Check operation of Receptor Cabinet Lock Release Lever
•
Check that ground wire is properly connected (only on system with moving
grid)
RECEPTOR CABINET LOCK RELEASE LEVER ADJUSTMENT PROCEDURE
This procedure provides the steps necessary to properly adjust the Receptor
Cabinet Lock Release Lever. Refer to Figure 14 and proceed as follows:
Chapter 5 Maintenance
30
Figure 14. Receptor Cabinet Lock Release Lever Adjustment
SOCKET HEAD
CAP SCREW
DELRIN
BRAKE