Quantum QT-730 Series, Installation And Operation Manual

Page: 15 / 46

Model QT-730 Radiographic Table
OVERVIEW
This manual provides information for installing, operating, and maintaining Quan-
tum Medical Imaging’s Fixed, Non-Float-Top, Radiographic Table, Model QT-730
(hereinafter referred to as the Radiographic Table). It is imperative that all safety
procedures described in this manual be strictly adhered to in order to ensure the
safety of both patient and user.
The key features of the Radiographic Table are as follows:
• Large tabletop area (74 inches long and 28 inches wide) provides an ample
examination platform
•
Typical patient-to-film plane distance of only 2.3 to 2.9 inches provides im-
proved radiography with minimum magnification
•
Compact, low-maintenance design
•
“Enclosed” base design (i.e., welded-on sheet metal covers surround the
table base)
• 650 lbs. maximum patient load capacity
•
Accepts a fixed grid cabinet or reciprocating bucky (with or without ACL)
INTENDED USE
The Fixed, Non-Float-Top, Radiographic Table, Model QT-730 is intended for
use as a patient support device during the performance of radiographic exami-
nations.
Chapter 1 Introduction
3
NOTE
The user should
read this man-
ual in its en-
tirety prior to
using this equip-
ment. It should
be kept in a
location near
the equipment
and readily ac-
cessible to the
those that oper-
ate it.
NOTE
Most tables are
shipped with a
Receptor Cabi-
net (i.e., fixed
grid cabinet or
bucky) factory
installed. How-
ever, the table
may be ordered
without a Re-
ceptor Cabinet.