background image

 
 

 

 

 
 

19

    |    

www.qntmnet.com

 

CE Statement 

This equipment complies with EU radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with minimum distance 24 cm 
between the radiator and your body. 

The device is restricted to indoor use only when operating in the 5150 to 5350MHz 
frequency range. 

 

All operational modes: 

2.4GHz: 802.11b, 802.11g, 802.11n(HT20), 802.11n(HT40),  802.11ac(VHT20), 802.11ac(VHT40), 
802.11ax(HE20), 802.11ax(HE40) 

5 GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac(VHT20), 802.11ac(VHT40), 
802.11ac(VHT80), 802.11ax(HE20), 802.11ax(HE40),802.11ax(HE80) 

BLE 2.4GHz: 802.15.1 

The frequency and maximum transmitted power limit in EU are listed as below: 

2412-2472MHz: 20 dBm 

5150-5350MHz: 23 dBm 

5500-5700MHz: 30 dBm 

 
 

 

 
 
 
The abbreviations of the countries, as prescribed in above table, where any restrictions on 
putting into service or any requirements for authorization of use exist. 

 

CE Mark Declaration of Conformance for EMI and Safety (EEC) 

 
This information technology equipment is in compliance with the Directive 2014/53/EU and 
Directive2014/35/EU. 
 
The Declaration of Conformity (DoC) can be obtained from www.qntmnet.com> downloads. 

 

 

 

 

AT  BE  B G   C H   C Y   C Z  

DE  DK  EE  EL  ES  FI 

FR  HR  H U   IE 

IS 

IT  

L I 

LT 

LU  LV  MT  NL 

N O   PL  PT  R O   SE  SI 

SK  TR  UK   

 

 

Summary of Contents for QN-I-270




















Reviews: