This Quick Setup Guide provides step-by-step instructions on how to set up Quantum
Networks Access Point. After completing the steps described in this Guide, you will be able
to install the Access Point (AP) on-site and provide wireless network access to users.
Glossary
Feature
Description
Management Mode
Standalone:
In this mode, each device is configured and
managed individually. It can be useful in scenarios with
few devices or sites with limited Internet access.
RUDDER:
In this mode, devices are configured and
managed from a central controller hosted in the cloud. It
offers many more sets of features as compared to the
Standalone mode.
Operation Mode
Bridge:
In this mode, the device connects to a network
over an ethernet cable and extends the coverage over
wireless.
Router:
In this mode, the device connects to Internet
Service Provider directly using DHCP / Static IP / PPPoE
protocols and shares Internet access over a wired or
wireless network to users.
Quantum RUDDER©
Quantum RUDDER©
is a cloud-hosted controller which
can be used to configure, manage & monitor devices
associated
with
it.
It
can
be
accessed
from
Icon description
Icon on GUI
Description
Click to get the option for the firmware update.
Click to get back to the home page.
Click to check the documentation.
Click to check device information.
