Quantum Qflash Trio QF8, Operating Instructions Manual, Page: 15 / 24

Advanced feature
The default setting of the
TRIO
uses the F/number and ISO
information from the camera.
It is possible to override the
camera settings and enter an
independent F/number and ISO.
To override the default setting
set the
F-ISO to FLASH in the
options menu.
8.2.2 Remote Groups
Select
R1, R2 or R3 Remote Group. Remote groups are used for setting
the mode and exposure of remote flashes independent of each other.
Mode and exposure of a Remote Group can be controlled by a
TRIO,
Pilot or CoPilot located in the hot shoe of the camera.
If you choose, you may set the mode and exposure of the remote flash
yourself and simply use the
TRIO, Pilot or CoPilot located in the hot
shoe of the camera to trigger the remote flash. This is the default setting
of the
TRIO.
For remote groups in AFILL exposure mode, exposure is controlled by
the sensor located on the front of the
TRIO. F/number and ISO
information from the camera is sent to the Remote TRIO wirelessly from
the TRIO, PILOT, or CoPilot in the hot shoe of the camera. For AFILL
exposure mode set the F-ISO option to CAMERA.
For remote groups in AUTO exposure mode, exposure is controlled by
the sensor located on the front of the
TRIO. F/number and ISO
information is set by the user. For AUTO exposure mode set the F-ISO
option to FLASH.
14
MODE
/OK SET
+
-
X
– MIT CH4
A UTO F 16
ISO
100
SENSOR LIMIT OFF
NORM
1.5
– 14
FT
FIRE OPT MAN QTTL
MODE
/OK SET
+
-
RCV R1 CH4
A UTO FILL +0
SENSOR LIMIT OFF
NORM
1.5
– 14
FT
FIRE OPT MAN QTTL