Quantum Qflash Trio QF8, Operating Instructions Manual, Page: 14 / 24

8.2 AFILL / AUTO exposure
Light output is controlled by the sensor located on the front of the
TRIO.
8.2.1 On Camera
F/number, ISO are sent to the
flash from the camera.
To adjust the exposure
press the
SET button until
the FILL setting is
highlighted.
Use the
Left (-)

and
Right (+)

buttons to
adjust the exposure up (brighter) or down (darker).
Auto Sensor Limit
Light output is controlled by the sensor located on the front of the
TRIO.
This sensor reads the light that is reflected from the subject. When the
subject has no background, someone standing in an open field, The
sensor will tend to overexpose the subject.
Sensor limit will correct this by instructing the flash to read only objects
within the limit set by you. To set the sensor limit press the
SET button
until the sensor limit is highlighted.
Use the softkeys located under the display to select desired the sensor
limit, or to turn the sensor limit off.
13
MODE
/OK SET
+
-
X
– MIT CH4
A UTO FILL +0
SENSOR LIMIT OFF
NORM
1.5
– 14
FT
FIRE OPT MAN QTTL
+0
MODE
/OK SET
+
-
X - MIT CH4
A UTO FILL +0
SENSOR LIMIT OFF
NORM
1.5
– 14
FT
5 10 15 -20 OFF
14
SENSOR LIMIT OFF