ATL P-Series Library User’s Guide Addendum - Prism FC230 Router
6331121-03, Ver. 3, Rel. 2
August 2002
Fibre Channel Services Command List
15
Info (Immediate)
Displays version numbers and other
product information for key FC
bridge components.
info
IPAddress
Sets/displays the current IP address
of the FC
set IPAddress xxx.xxx.xxx.xxx
get IPAddress
IPDHCP
Enables/disables the FC to request
an IP address from the network.
Requires the bridge be attached to a
network with at least one DHCP
server.
enabled
set IPDHCP [enabled | disabled]
get IPDHCP
IPGateway
Sets/displays the current default
gateway. If IPDHCP is enabled, the
get command reports the current IP
gateway assigned by the
nameserver.
set IPGateway xxx.xxx.xxx.xxx
get IPGateway
IPSubnetMask
Sets/displays the current subnet
mask. IF IPDHCP is enabled, the get
command reports the current IP
subnet mask assigned by the
nameserver.
set IPSubnetMask xxx.xxx.xxx.xxx
get IPSubnetMask
LicensedOption
Enables/disables a user-defined
licensed option.
none
set licensedoption [option_name [enabled |
disabled]]
get licensedoption
The get option reports whether a particular
option is enabled.
LogEvent
Sets the switches which control the filtering performed when
logging events. The switches have the following meanings
and settings:
(enabled | disabled) switch: controls whether or not events
logging is enabled or disabled.
(subsystem) switch: same as switch for DispEvent in previous
section
(event_level) switch: same as switch for DispEvent in
previous section
(status) switch: same as switch for DispEvent in previous
section
disabled
set logevent [enabled | disabled] |
[[subsystem] [event_level] [status]]
get logevent
MaxEnclTempAlrm
Sets/displays the maximum
enclosure temperature alarm of the
unit in degrees C (5-40 degrees C).
70 degrees
Centigrade
set maxencltempalrm [5 - 40]
get maxencltempalrm
Command
Description
Default
Syntax