background image

Quantum ATL P4000 and ATL P7000 Prism FC470 User’s Guide Addendum

Document 6331190-01, Ver. 1, Rel. 1

July 2003

FC470 Web Interface

25

Figure 16  Fibre Channel 
Dialog Box

Table 12   Fibre Channel 
Map Settings

Statistics Page

0

The 

Statistics

 page allows you to view various FC470 statistics 

remotely.
To access the 

Statistics

 page:

Note:

Auto-assigned and SCC maps cannot be modified, cleared, 

filler, or have entries removed.

Clear Map

Clears all entries from the current map.

Remove Gaps

Removes any incremental gaps in the sequence of 

LUNs listed in the table. When the system removes 

gaps from the table, the LUNs are renumbered in 

sequential order, starting with LUN 0.

Fill Maps

Fills in the current map. To use the fill map option, 

expand the fill map priority drop down box, select the 

fill option, and then click 

Fill Map

.

Discovered 
Device Entry

Adds a discovered device to the map. To add a 

discovered device to the map, use the drop down box 

to enter the settings, at the desired LUN number, and 

then click 

Create Entry

 in the discovered device entry 

section of the screen.

Manual Device 
Entry

Creates a map entry for a device that is not yet 

discovered or installed. To add a new device to the 

map, use the drop down boxes to enter the settings, 

and then click 

Create Entry

 in the manual device 

entry section of the screen.

Summary of Contents for P4000 Series








































Reviews: