![background image](http://html.mh-extra.com/html/quantum/lto-9-hh-sas/lto-9-hh-sas_user-manual_3841158050.webp)
Chapter 4: Operations
Removing a Tape Cartridge
42
Quantum LTO-9 HH SAS User’s Guide
Figure 7
Inserting a
cartridge into the drive
Caution:
Do not attempt to load a cartridge when the drive is in
Maintenance Mode until the drive requests it.
Removing a Tape Cartridge
To remove a tape cartridge:
1
Ensure that the drive is powered-on.
2
Press the
Unload
button. The drive rewinds the tape and partially
ejects the cartridge. The
Ready
light flashes while the tape rewinds,
then goes out before the cartridge partially ejects.
3
After the cartridge partially ejects, grasp the cartridge and remove
it.
Summary of Contents for LTO-9 HH SAS
