Installation
3-4
Quantum Fireball Plus AS 10.2/20.5/30.0/40.0/60.0 GB AT
3.3
3.3
3.3
3.3
HARDWARE OPTIONS
HARDWARE OPTIONS
HARDWARE OPTIONS
HARDWARE OPTIONS
The configuration of a Quantum Fireball Plus AS 10.2/20.5/30.0/40.0/60.0 GB
AT hard disk drive depends on the host system in which it is to be installed. This
section describes the hardware options that you must take into account prior to
installation. Figure 3-4 shows the printed circuit board (PCB) assembly,
indicating the jumpers that control some of these options.
Figure 3-4
Figure 3-4
Figure 3-4
Figure 3-4
Jumper Locations for the Quantum Fireball Plus AS Hard Disk Drive
Figure 3-5
Figure 3-5
Figure 3-5
Figure 3-5
Jumper Locations on the Interface Connector
DC Power
Connector
Jumpers
ATA-Bus
Interface
Header
Back of
Drive
Front
Drive
Summary of Contents for FIREBALL PLUS AS 10.2
