Quantum F2000, User Manual

Page: 84 / 200

Chapter 4: F2000 Customer Replaceable Units (CRUs)
Chassis Replacement
70 Quantum F2000 User’s Guide
Remove and Install a
Chassis
Removing and installing a chassis requires you to complete the
following procedures in the order presented:
1 Power Off the System on page 70
2 Disconnect the Cables from the System on page 73
3 Remove the Failed Chassis from the Rack on page 77
4 Locate the New Chassis on page 79
5 Remove Components from the Failed Chassis and Install them into
the New Chassis on page 79
6 Install the Chassis into the Rack on page 91
7 Connect the Cables to the System on page 93
8 Verify the System is Up and Running on page 97
9 Install the Bezel on page 98
Power Off the System
To power off the system:
1
Using an Ethernet cable, connect a notebook computer to the IPMI/
BMC port in the top canister (see Figure 55 ).
Figure 55 IPMI/BMC Port
Location on the Top Canister
2 Access the BMC Web UI.
Item Description
1 IPMI/BMC port in the top canister