Quantum F2000, User Manual, Page: 91 / 200

Chapter 4: F2000 Customer Replaceable Units (CRUs)
Chassis Replacement
Quantum F2000 User’s Guide 77
Remove the Failed Chassis from the Rack
To remove the failed chassis:
1
Locate the black screws that are installed below the thumbscrews
on the front of the chassis. There is one screw on each side of the
chassis.
2
Remove screws from the Rails using a #1 Phillips screwdriver (see
Figure 65 ).
Figure 65 Black Screws
on the
Front of the Chassis
3 Locate the thumbscrews on both sides of the chassis.