Performing Initial Configuration
53
DXi6902
Figure 46 Getting Started
Wizard: Confirm
15
Review the settings you selected to make sure they are correct. If necessary, click
Previous
to return to a previous step to make changes
16
After you have confirmed all settings, click
Finish
.
A message appears stating that completing the setup will restart the system.
17
Click
Yes
to restart the system.
18
Disconnect the computer from the DXi6902. Reset the computer network settings
back to the default values.
19
Wait for the system to fully restart. This can take up to 30 minutes.
Continue with the next section to connect the Ethernet cables.