Initializing the Storage Arrays and Software
Quantum DXi6900 Installation Guide
49
Figure 38:
Powering on the Array Modules
Port 1
Port 2
ID/
Diag
|O|O|
Port 1
Port 2
ID/
Diag
|O|O|
Array Module (Rear)
Power Switches
Figure 39:
Powering on the Node
System Node (Front)
Power Button
2. Using an Ethernet cable, connect the Ethernet port on the service laptop to the service port on the Node
).
Figure 40:
Connecting to the Service Port
System Node (Rear)
Service Port
3. Configure the network settings on the laptop:
Note:
This procedure assumes you are running Windows 7 on the laptop. The steps might be
different if you are using another operating system.
a. Access the
Network Connections
control panel. To do this, press the
Windows
key on the
keyboard, type
view network connections
, and press
<Enter>
.