Chapter 3: FRU Removal and Replacement Procedures
Replacing an Array Module Controller
Quantum DXi6900-S Field Service Manual
160
Removing a Failed Array Module Controller
To remove the failed Array module controller:
1. Prepare the controller air blocker by removing it from the packaging and folding it inward at right angles
so it is ready to insert into the open controller slot (see
).
Figure 115:
Controller Air Blocker
2. Disconnect the SAS cables from the failed controller.
3. Pull the handles out and toward the sides of the controller canister, and pull the Array module controller
out of the Array module chassis (see
).