Quantum DXi4701 User Manual Download

Page: 219 / 440

Quantum DXi4701 User’s Guide

193

Chapter 8

DXi4701 Alerts

The

Alerts

page allows you to view and work with administration alerts

and service tickets. The DXi4701 generates administration alerts and

service tickets when a hardware or software event occurs.
To access the

Alerts

page, click the

Alerts

menu.

The

Alerts

page contains the following tabs:

•

Admin Alerts

•

Service Tickets

Admin Alerts

The

Admin Alerts

page allows you to view and work with

administration alerts. The DXi4701 generates an administration alert

when the condition of the system has changed, such as going from the

offline state to the online state.

Note:

In addition to viewing administration alerts on the

Admin

Alerts

page, you can configure the system to send alerts to an

e-mail address (see

Recipients

on page 335).

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands