Quantum DXi4701, User Manual

Page: 180 / 440

Chapter 6: DXi4701 Replication
Receive VTL
154 Quantum DXi4701 User’s Guide
To delete a snapshot:
1 Do one of the following actions:
• On the source system, disable replication for the partition
associated with the snapshot (see Enabling Replication For a
Share or Partition on page 126).
• On the target system, delete the source system associated with
the snapshot from the list of allowed replication sources (see
Deleting a Replication Source on page 259).
2 On the target system, select a snapshot in the Snapshots List and
click Delete .
Note: If you delete the last snapshot for a partition while
replication for the partition (to this target) is still enabled,
any replicated data not yet protected by a replicated
partition is not deleted. To delete this data, on the source
system, disable replication for the partition before deleting
the last snapshot.
3 Click Yes to confirm the action.
Recovery Jobs
The Recovery Jobs page allows you to view information about snapshot
recover operations that were previously completed.
To access the
Recovery Jobs page, on the Receive VTL page, click the
Recovery Jobs tab (see Figure 83 ).